S7-1500 by SIEMENS

CPU 1512C-1 PN, 400 KB Prog., 2 MB Data - 6ES7512-1CM03-0AB0

INR 1
DATASHEET
In stock

Description

SIMATIC S7-1500 compact CPU, CPU 1512C-1 PN, central processing unit with work memory: 400 KB for program and 2 MB for data, 32 digital inputs, 32 digital outputs, 5 analog inputs, 2 analog outputs, 6 high-speed counters, 4 fast outputs for PTO/PWM/frequency output, 1st interface: PROFINET IRT with 2-port switch, 6 ns bit performance, including front connector push-in, SIMATIC Memory Card required

General information

Product type designation CPU 1512C-1 PN

HW functional status FS01

Firmware version V4.1

● FW update possible Yes

Product function

● I&M data Yes; I&M0 to I&M3

● Isochronous mode Yes; with minimal OB 6x cycle of 500 μs (distributed)

● SysLog Yes

Engineering with

● STEP 7 TIA Portal configurable/integrated from version V21 (FW V4.1) / V19 (FW V3.1) or higher; configurable with older TIA Portal versions as 6ES7512-1CK01-0AB0

Configuration control

via dataset Yes

Display

Screen diagonal [cm] 3.45 cm

Control elements

Number of keys 8

Mode buttons 2

Supply voltage

Rated value (DC) 24 V

permissible range, lower limit (DC) 19.2 V; 20.4 V DC, for supplying the digital inputs/outputs

permissible range, upper limit (DC) 28.8 V

Reverse polarity protection Yes

Mains buffering

● Mains/voltage failure stored energy time 5 ms; Refers to the power supply on the CPU section

● Repeat rate, min. 1/s

Input current

Current consumption (rated value) 0.66 A; without DI/DO load

Current consumption, max. 1 A; without DI/DO load

Inrush current, max. 1.22 A; Rated value

I²t 0.6 A²·s

Digital inputs

● from load voltage L+ (without load), max. 20 mA; per group

Digital outputs

● from load voltage L+, max. 30 mA; Per group, without load

Encoder supply

Number of outputs 2; One common 24 V encoder supply per 16 digital inputs

24 V encoder supply

● 24 V Yes; L+ (-0.8 V)

● Short-circuit protection Yes

● Output current, max. 1 A

Power

Infeed power to the backplane bus 10 W

Power consumption from the backplane bus (balanced) 9 W

Power loss

Power loss, typ. 6 W

Storage

Number of slots for SIMATIC memory card 1

SIMATIC memory card required Yes

Work memory

● integrated (for program) 400 kbyte

● integrated (for data) 2 Mbyte

Load memory

● Plug-in (SIMATIC Memory Card), max. 32 Gbyte

Backup

● maintenance-free Yes

CPU processing times

for bit operations, typ. 6 ns

for word operations, typ. 7 ns

for fixed point arithmetic, typ. 9 ns

for floating point arithmetic, typ. 37 ns

CPU-blocks

Number of elements (total) 4 000; Blocks (OB, FB, FC, DB) and UDTs

DB

● Number range 1 ... 60 999; subdivided into: number range that can be used by the user: 1 ... 59 999, and number range of DBs created via SFC 86: 60 000 ... 60 999

● Size, max. 2 Mbyte; For DBs with absolute addressing, the max. size is 64 KB

FB

● Number range 0 ... 65 535

● Size, max. 400 kbyte

FC

● Number range 0 ... 65 535

● Size, max. 400 kbyte

OB

● Size, max. 400 kbyte

● Number of free cycle OBs 100

● Number of time alarm OBs 20

● Number of delay alarm OBs 20

● Number of cyclic interrupt OBs 20; With minimum OB 3x cycle of 250 µs

● Number of process alarm OBs 50

● Number of DPV1 alarm OBs 3

● Number of isochronous mode OBs 1

● Number of startup OBs 100

● Number of asynchronous error OBs 4

● Number of synchronous error OBs 2

● Number of diagnostic alarm OBs 1

Nesting depth

● per priority class 24

Counters, timers and their retentivity

S7 counter

● Number 2 048

Retentivity

— can be set Yes

IEC counter

● Number Any (only limited by the main memory)

Retentivity

— can be set Yes

S7 timer

● Number 2 048

Retentivity

— adjustable Yes

IEC timer

● Number Any (only limited by the main memory)

Retentivity

— can be set Yes

Data areas and their retentivity

Retentive data area (incl. timers, counters, flags), max. 216 kbyte; in total; for bit memories, timers, counters, DBs, and technology data (axes)

Extended retentive data area (incl. timers, counters, flags), max. 2 Mbyte; When using PS 6 0W 24/48/60 V DC HF

Flag

● Size, max. 16 kbyte

● Number of clock memories 8; 8 clock memory bit, grouped into one clock memory byte

Data blocks

● Retentivity adjustable Yes

● Retentivity preset No

Local data

● per priority class, max. 64 kbyte; max. 16 KB per block

Address area

Number of IO modules 2 048; max. number of modules / submodules

I/O address area

● Inputs 32 kbyte; All inputs are in the process image

● Outputs 32 kbyte; All outputs are in the process image

per integrated IO subsystem

— Inputs (volume) 8 kbyte

— Outputs (volume) 8 kbyte

per CM/CP

— Inputs (volume) 8 kbyte

— Outputs (volume) 8 kbyte

Subprocess images

● Number of subprocess images, max. 32

Hardware configuration

Number of distributed IO systems 32; A distributed I/O system is characterized not only by the integration of distributed I/O via PROFINET or PROFIBUS communication modules, but also by the connection of I/O via AS-i master modules or links (e.g. IE/PB-Link)

Number of DP masters

● via CM 6; A maximum of 6 CMs/CPs (PROFIBUS, PROFINET, Ethernet) can be inserted in total

Number of IO Controllers

● integrated 1

● Via CM 6; A maximum of 6 CMs/CPs (PROFIBUS, PROFINET, Ethernet) can be inserted in total

Rack

● Modules per rack, max. 32; CPU + 31 modules

● Number of lines, max. 1

PtP CM

● Number of PtP CMs the number of connectable PtP CMs is only limited by the number of available slots

Time of day

Clock

● Type Hardware clock

● Backup time 6 wk; At 40 °C ambient temperature, typically

● Deviation per day, max. 10 s; Typ.: 2 s

Operating hours counter

● Number 64

Clock synchronization

● supported Yes

● to DP, master Yes; via PROFIBUS CM / CP

● on DP, device Yes; via PROFIBUS CM / CP

● in AS, master Yes

● in AS, device Yes

● on Ethernet via NTP Yes

Specifications

--
--