S7-200 SMART by siemens

Digital I/O SM DT16, 8 DI / 8 DO-6ES7288-2DT16-0AA0

INR 1
Learn more
In stock

Description

SIMATIC S7-200 SMART, Digital I/O SM DT16, 8DI/8DO, 8 DI 24 V DC, Sink/Source, 8 DO, Transistor 0.75A

General information

Product type designation SM DT16, DI 8x24 V DC, DQ 8x24 V DC/0.75 A

Supply voltage

Rated value (DC) 24 V

permissible range, lower limit (DC) 20.4 V

permissible range, upper limit (DC) 28.8 V

Input current

from backplane bus 5 V DC, typ. 115 mA; For 5 V DC from CPU module

Digital inputs

Number of digital inputs 8

● in groups of 2

Parallel switching of inputs Yes

Input characteristic curve in accordance with IEC 61131, type 1 Yes

Number of simultaneously controllable inputs

horizontal installation

— up to 50 °C, max. 8

vertical installation

— up to 40 °C, max. 8

Input voltage

● Type of input voltage DC

● Rated value (DC) 24 V

● for signal “0” < 5 V DC

● for signal “1” +15 to +30 V

Input current

● for signal “0”, max. (permissible quiescent current) 1 mA

● for signal “1”, min. 2.5 mA

● for signal “1”, max. 5 mA

● for signal “1”, typ. 4 mA

Input delay (for rated value of input voltage)

for standard inputs

— at “0” to “1”, max. 200 µs

— at “1” to “0”, max. 200 µs

Cable length

● shielded, max. 500 m

● unshielded, max. 300 m

Digital outputs

Number of digital outputs 8

● in groups of 2

Current-sinking No

Current-sourcing Yes

Short-circuit protection No

Switching capacity of the outputs

● with resistive load, max. 0.75 A

● on lamp load, max. 5 W

Output voltage

● Rated value (DC) 24 V

● for signal “0”, max. 0.1 V

● for signal “1”, min. 20 V

● for signal “1”, max. 28.8 V; max. value is equal to feed L+

Output current

● for signal “1” rated value 0.75 A

Output delay with resistive load

● “0” to “1”, max. 50 µs

● “1” to “0”, max. 200 µs

Parallel switching of two outputs

● for logic links Yes; only outputs of the same group

● for uprating Yes; possible (only outputs of the same group)

● for redundant control of a load Yes; only outputs of the same group

Total current of the outputs (per group)

all mounting positions

— up to 40 °C, max. 3 A

horizontal installation

— up to 50 °C, max. 3 A

vertical installation

— up to 40 °C, max. 3 A

all other mounting positions

— up to 40 °C, max. 3 A

Interrupts/diagnostics/status information

Diagnostics indication LED

● for status of the inputs Yes

● for status of the outputs Yes

Potential separation

Potential separation digital inputs

● between the channels Yes; Optocoupler

Potential separation digital outputs

● between the channels Yes; Optocoupler

Isolation

Isolation tested with 500 V AC for 1 minute

EMC

Interference immunity against discharge of static electricity

● Interference immunity against discharge of static electricity acc. to IEC 61000-4-2 Yes; ±4 kV contact discharge (to IEC 801-2/IEC 1000-4-2; ESD), ±8 kV air discharge (to IEC 801-2/IEC 1000-4-2; ESD)

— Test voltage at air discharge 8 kV

— Test voltage at contact discharge 4 kV

Interference immunity against high-frequency electromagnetic fields

● Interference immunity against high-frequency radiation acc. to IEC 61000-4-3 Yes

— Frequency range of the RF radiation 80 to 1000 MHz, 10 V/m, 1.4 to 2.0 GHz, 3 V/m, 2.0 to 2.7 GHz, 1 V/m(In the range of 87 MHz to 187 MHz, 174 MHz to 230 MHz and 470 MHz to 790 MHz: 3V/m )

Interference immunity to cable-borne interference

● Interference immunity on supply lines acc. to IEC 61000-4-4 Yes; 2 kV acc. to IEC 61000-4-4, burst

● Interference immunity on signal cables acc. to IEC 61000-4-4 Yes; ±2 kV acc. to IEC 61000-4-4, Burst

Interference immunity against voltage surge

● Interference immunity on supply lines acc. to IEC 61000-4-5 Yes; With upstream protective element

Interference immunity against conducted variable disturbance induced by high-frequency fields

● Interference immunity against high frequency current feed acc. to IEC 61000-4-6 Yes

● Interference immunity against high-frequency radiation acc. to IEC 61000-4-6 Yes; 10 V/m, with 80% amplitude modulation at 1 kHz

— Test voltage at 80% amplitude modulation with 1kHz in the range 9 kHz to 80 MHz 10 V

Emission of radio interference acc. to EN 55 011

● Emission of radio interference Interference emission to EN 50081-2, testing to EN 55011, Class A, Group 1

● Limit class A, for use in industrial areas Yes

Degree and class of protection

IP degree of protection IP20

Dimensions

Width 45 mm

Height 100 mm

Depth 81 mm

Weights

Weight, approx. 179.7 g

Approvals / Certificates