Description
SIMATIC S7-200 SMART, Digital output EM DT16 16 DO, 24 VDC, Transistor 0.75A
General information
Product type designation SM DT16, DQ 16x24 V DC/0.75 A
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Input current
from backplane bus 5 V DC, typ. 135 mA
Digital inputs
Number of digital inputs 0
Digital outputs
Number of digital outputs 16
● in groups of 4
Current-sinking No
Current-sourcing Yes
Short-circuit protection No
Controlling a digital input Yes
Switching capacity of the outputs
● with resistive load, max. 0.75 A
● on lamp load, max. 5 W
Output voltage
● Rated value (DC) 24 V
● for signal “0”, max. 0.1 V
● for signal “1”, min. 20 V DC
Output current
● for signal “1” rated value 0.75 A
● for signal “1” permissible range, max. 0.75 A
● for signal “1” permissible range for 0 to 40 °C, max. 750 mA
● for signal “0” residual current, max. 10 µA
Output delay with resistive load
● “0” to “1”, max. 50 µs
● “1” to “0”, max. 200 µs
Cable length
● shielded, max. 500 m
● unshielded, max. 150 m
Interrupts/diagnostics/status information
Diagnostics indication LED
● for status of the outputs Yes
Potential separation
Potential separation digital outputs
● between the channels Yes; Optocoupler
Isolation
Isolation tested with 500 V AC for 1 minute
EMC
Interference immunity against conducted variable disturbance induced by high-frequency fields
● Interference immunity against high frequency current feed acc. to IEC 61000-4-6 Yes; 10 V, 150 kHz to 80 MHz (to IEC 61000-4-6)
● Interference immunity against high-frequency radiation acc. to IEC 61000-4-6 Yes; 10 V/m, with 80% amplitude modulation at 1 kHz
— Test voltage at 80% amplitude modulation with 1kHz in the range 9 kHz to 80 MHz 10 V
Emission of radio interference acc. to EN 55 011
● Emission of radio interference Interference emission to EN 50081-2, testing to EN 55011, Class A, Group 1
● Limit class A, for use in industrial areas Yes; EN 61000-6-4, interference emission: Intended for use in industrial areas.
Degree and class of protection
IP degree of protection IP20
Standards, approvals, certificates
CE mark Yes; CE marking / EC Declaration of Conformity
Ambient conditions
Free fall
● Fall height, max. 0.3 m
Ambient temperature during operation
● min. 0 °C
● max. 55 °C
● horizontal installation, min. 0 °C
● horizontal installation, max. 55 °C
● vertical installation, min. 0 °C
● vertical installation, max. 45 °C
Ambient temperature during storage/transportation
● min. -40 °C
● max. 70 °C
Relative humidity
● Operation at 25 ℃ without condensation, max. 95 %
Dimensions
Width 45 mm
Height 100 mm
Depth 81 mm
Weights
Weight, approx. 186 g







