Description
SIMATIC ET 200SP, Analog input module, AI 2xI 2-/4-wire Standard, Pack quantity: 1 unit, suitable for BU type A0, A1, Color code CC05, Module diagnostics, 16 bit
General information
Product type designation AI 2xI 2-/4-wire ST
HW functional status FS22 or higher
Firmware version V2.0.0
● FW update possible Yes
usable BaseUnits BU type A0, A1
Color code for module-specific color-coded label CC05
Product function
● I&M data Yes; I&M0 to I&M3
● Isochronous mode No
● Measuring range scalable No
Engineering with
● STEP 7 TIA Portal configurable/integrated from version V21 HSP0492 / integrated as of V21.1
● STEP 7 configurable/integrated from version V5.7 SP3 HF3 with HSP0348 V2.0 / integrated as of V5.8
● PROFIBUS from GSD version/GSD revision One GSD file each, Revision 3 and 5 and higher
● PROFINET from GSD version/GSD revision GSDML V2.45
Operating mode
● Oversampling No
● MSI No
CiR - Configuration in RUN
Reparameterization possible in RUN Yes
Calibration possible in RUN No
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
Current consumption (rated value) 37.5 mA
Current consumption, max. 245 mA
Encoder supply
24 V encoder supply
● 24 V Yes
● Short-circuit protection Yes
● Output current, max. 50 mA; Total current for both channels (two-wire)
Additional 24 V encoder supply
● 24 V Yes
● Short-circuit protection Yes; module-wise
● Output current, max. 200 mA; Total current for both channels (four-wire)
Power loss
Power loss, typ. 0.9 W
Address area
Address space per module
● Address space per module, max. 4 byte; + 1 byte for QI information
Hardware configuration
Automatic encoding Yes
● Mechanical coding element Yes
● Type of mechanical coding element Type A
Selection of BaseUnit for connection variants
● 1-wire connection BU type A0, A1
● 2-wire connection BU type A0, A1
● 4-wire connection BU type A0, A1
Analog inputs
Number of analog inputs 2
● For current measurement 2
permissible input current for current input (destruction limit), max. 50 mA
Cycle time (all channels), min. 500 µs
Input ranges (rated values), currents
● 0 to 20 mA Yes; 15 bit
— Input resistance (0 to 20 mA) 130 Ω; 90 ohms with two wires
● -20 mA to +20 mA Yes; 16 bit incl. sign
— Input resistance (-20 mA to +20 mA) 130 Ω
● 4 mA to 20 mA Yes; 15 bit
— Input resistance (4 mA to 20 mA) 130 Ω; 90 ohms with two wires
Cable length
● shielded, max. 1 000 m
Analog value generation for the inputs
Measurement principle Sigma Delta
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max. 16 bit
● Integration time, parameterizable Yes
● Interference voltage suppression for interference frequency f1 in Hz 16.6 / 50 / 60 Hz / off
● Conversion time (per channel) 50 ms @ 60 Hz, 60 ms @ 50 Hz, 180 ms @ 16.6 Hz, 500 µs without filter
Smoothing of measured values
● Number of smoothing levels 4
● Parameterizable Yes
● Step: None Yes; 1x conversion time
● Step: low Yes; 4x conversion time
● Step: Medium Yes; 8x conversion time
● Step: High Yes; 16x conversion time
Encoder
Connection of signal encoders
● for current measurement as 2-wire transducer Yes
— Burden of 2-wire transmitter, max. 650 Ω
● for current measurement as 4-wire transducer Yes
Errors/accuracies
Linearity error (relative to input range), (+/-) 0.01 %
Temperature error (relative to input range), (+/-) 0.005 %/K
Crosstalk between the inputs, min. -50 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) 0.05 %
Operational error limit in overall temperature range
● Current, relative to input range, (+/-) 0.5 %
Basic error limit (operational limit at 25 °C)
● Current, relative to input range, (+/-) 0.3 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
● Series mode interference (peak value of interference < rated value of input range), min. 70 dB
● Common mode voltage, max. 10 V
● Common mode interference, min. 90 dB
Interrupts/diagnostics/status information
Diagnostics function Yes
Alarms
● Diagnostic alarm Yes
● Limit value alarm No
Diagnoses
● Monitoring the supply voltage Yes
● Wire break Yes; at 4 to 20 mA
● Short-circuit Yes; Short-circuit of the encoder supply
● Group error Yes
● Overflow/Underflow Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED
● Channel status display Yes; green LED
● for channel diagnostics No
● for module diagnostics Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels No
● between the channels and backplane bus Yes
● between the channels and the power supply of the electronics Yes
Permissible potential difference
between the inputs (UCM) 10 Vpp
Isolation
Isolation tested with 707 V DC (type test)
Standards, approvals, certificates
Ecological footprint
● environmental product declaration Yes
Global warming potential
— global warming potential, (total) [CO2 eq] 9.32 kg
— global warming potential, (during production) [CO2 eq] 4.97 kg
— global warming potential, (during operation) [CO2 eq] 4.79 kg
— global warming potential, (after end of life cycle) [CO2 eq] -0.449 kg
Security
signed firmware update Yes; firmware V2.0.0 or higher
Ambient conditions







