Description
SIMATIC ET 200SP, digital input module, DI 16x24 V DC SRC BA, input type 1 (IEC 61131), source input, (NPN, sourcing input), packing unit: 1 unit, suitable for BU type A0, color code CC00, input delay 0.05..20 ms; module diagnostics for: supply voltage
General information
Product type designation DI 16x24VDC SRC BA
Firmware version V0.0
● FW update possible No
usable BaseUnits BU type A0
Color code for module-specific color-coded label CC00
Product function
● I&M data Yes; I&M0 to I&M3
● Isochronous mode No
Engineering with
● STEP 7 TIA Portal configurable/integrated from version STEP 7 V19 or higher with HSP0433, integrated as of V21
● PROFIBUS from GSD version/GSD revision One GSD file each, Revision 3 and 5 and higher
● PROFINET from GSD version/GSD revision GSDML V2.43
Operating mode
● DI Yes
● Counter No
● Oversampling No
● MSI No
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
Current consumption (rated value) 8 mA; rated voltage, all channels active, no load
Current consumption, max. 65 mA; worst case voltage, all channels active, max. load, no derating
Encoder supply
Short-circuit protection No
Power loss
Power loss, typ. 0.8 W; rated voltage, 50 % active channels
Address area
Address space per module
● Address space per module, max. 2 byte
● Inputs 2 byte
Hardware configuration
Automatic encoding Yes
● Mechanical coding element Yes
● Type of mechanical coding element Type A
Selection of BaseUnit for connection variants
● 1-wire connection BU type A0
● 2-wire connection BU type A0 with AUX terminals or potential distributor module
● 3-wire connection BU type A0 with AUX terminals or potential distributor module
Digital inputs
Number of digital inputs 16
Digital inputs, parameterizable Yes
Sourcing/sinking input Sourcing
Input characteristic curve in accordance with IEC 61131, type 1 Yes
Input characteristic curve in accordance with IEC 61131, type 3 Yes
Number of simultaneously controllable inputs
● Number of simultaneously controllable inputs 16
Input voltage
● Rated value (DC) 24 V
● for signal “0” 30 V to -5 V (reference potential is L+)
● for signal “1” -11 V to -30 V (reference potential is L+)
Input current
● for signal “1”, typ. 4 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length)
— at “0” to “1”, min. 0.05 ms
— at “0” to “1”, max. 20 ms
— at “1” to “0”, min. 0.05 ms
— at “1” to “0”, max. 20 ms
Cable length
● shielded, max. 1 000 m
● unshielded, max. 200 m
Encoder
Connectable encoders
● 2-wire sensor Yes
— permissible quiescent current (2-wire sensor), max. 1.5 mA
Interrupts/diagnostics/status information
Diagnostics function Yes
Alarms
● Diagnostic alarm Yes
Diagnoses
● Diagnostic information readable Yes
● Monitoring the supply voltage Yes
— parameterizable Yes
● Monitoring of encoder power supply No
● Wire break No
● Short-circuit No
● Short-circuit to ground No
● Short-circuit to L+ No
● Group error No
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED
● Channel status display Yes; green LED
● for channel diagnostics No
● for module diagnostics Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels No
● between the channels and backplane bus Yes
● Between the channels and load voltage L+ No
Isolation
Isolation tested with 707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions No
Ecological footprint
● environmental product declaration Yes
Global warming potential
— global warming potential, (total) [CO2 eq] 21 kg
— global warming potential, (during production) [CO2 eq] 4.25 kg
— global warming potential, (during operation) [CO2 eq] 1.75 kg
— global warming potential, (after end of life cycle) [CO2 eq]







