ET 200SP by SIEMENS

ET 200SP, DI 8x 24VAC..48VUC BA, PU 1 - 6ES7131-6CF00-0AU0

INR 1
DATASHEET
In stock

Description

SIMATIC ET 200SP, digital input module, DI 8x 24 V AC..48 V UC Basic, packing quantity: 1 unit, suitable for BU type U0, color code CC20, module diagnostics

General information

Product type designation DI 8x24VAC/48VUC BA

HW functional status From FS02

Firmware version V0.0

● FW update possible No

usable BaseUnits BU type U0

Product function

● I&M data Yes; I&M0 to I&M3

● Isochronous mode No

● suitable for operation on PROFINET R1 IMs Yes

Engineering with

● STEP 7 TIA Portal configurable/integrated from version V15

● STEP 7 configurable/integrated from version V5.6

● PROFIBUS from GSD version/GSD revision One GSD file each, Revision 3 and 5 and higher

● PROFINET from GSD version/GSD revision GSDML V2.3

Operating mode

● DI Yes

● Counter No

● Oversampling No

● MSI No

Supply voltage

Rated value (DC) 48 V

permissible range, lower limit (DC) 40.8 V

permissible range, upper limit (DC) 57.6 V

Rated value (AC) 48 V; 24 V/48 V; 50 Hz/60 Hz

permissible range, lower limit (AC) 40.8 V

permissible range, upper limit (AC) 52.8 V

Reverse polarity protection Yes

Input current

Current consumption, max. 70 mA; without sensor supply

Encoder supply

Number of outputs 8

Short-circuit protection Yes; Per module, 5x 20 mm fuse, 2 A/250 V, quick-response, replaceable

Output current

● up to 60 °C, max. 1 A

24 V encoder supply

● 24 V No

Power loss

Power loss, typ. 1.5 W

Address area

Address space per module

● Address space per module, max. 1 byte

Hardware configuration

Automatic encoding

● Mechanical coding element Yes

● Type of mechanical coding element type C

Selection of BaseUnit for connection variants

● 1-wire connection BU type U0

● 2-wire connection BU type U0

● 3-wire connection BU type U0 + Potential distributor module

● 4-wire connection BU type U0 + Potential distributor module

Digital inputs

Number of digital inputs 8

Sourcing/sinking input P-reading

Input characteristic curve in accordance with IEC 61131, type 1 Yes

Input characteristic curve in accordance with IEC 61131, type 2 No

Input characteristic curve in accordance with IEC 61131, type 3 No

Pulse extension No

Input voltage

● for signal “0” AC/DC < 10 V

● for signal “1” AC > 14 V, DC > 34 V

Input current

● for signal “1”, typ. 3.5 mA

Input delay (for rated value of input voltage)

for standard inputs

— Parameterizable No

— at “0” to “1”, max. 15 ms

— at “1” to “0”, max. 20 ms

Cable length

● shielded, max. 1 000 m

● unshielded, max. 600 m

Encoder

Connectable encoders

● 2-wire sensor Yes

Interrupts/diagnostics/status information

Diagnostics function Yes

Alarms

● Diagnostic alarm Yes

Diagnoses

● Diagnostic information readable Yes

● Monitoring the supply voltage Yes

● Monitoring of encoder power supply Yes

● Group error Yes

Diagnostics indication LED

● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED

● Channel status display Yes; green LED

● for channel diagnostics No

● for module diagnostics Yes; green/red DIAG LED

Potential separation

Potential separation channels

● between the channels No

● between the channels and backplane bus Yes

● between the channels and the power supply of the electronics No

Isolation

Isolation tested with 1 200 V DC between supply voltage and backplane bus

Standards, approvals, certificates

Suitable for safety functions No

Ecological footprint

● environmental product declaration Yes

Global warming potential

— global warming potential, (total) [CO2 eq] 15.9 kg

— global warming potential, (during production) [CO2 eq] 3.69 kg

— global warming potential, (during operation) [CO2 eq] 12.7 kg

— global warming potential, (after end of life cycle) [CO2 eq] -0.495 kg

Specifications

--
--