S7-1500 by siemens

S7-1500, DQ 8x230VAC/2A ST (Triac)-6ES7522-5FF00-0AB0

INR 1
Learn more
In stock

Description

SIMATIC S7-1500, digital output module DQ 8x230 V AC/2 A ST; TRIAC; 8 channels in groups of 1; 2 A per group; Substitute value: Front connector (screw terminals or push-in) to be ordered separately

General information

Product type designation DQ 8x230 V AC/2A ST (triac)

HW functional status from FS01

Firmware version V2.3.0

● FW update possible Yes

Product function

● I&M data Yes; I&M0 to I&M3

● Isochronous mode No

● Prioritized startup Yes

Engineering with

● STEP 7 TIA Portal configurable/integrated from version V12 / V12

● STEP 7 configurable/integrated from version V5.5 SP3 / -

● PROFIBUS from GSD version/GSD revision V1.0 / V5.1

● PROFINET from GSD version/GSD revision V2.3 / -

Operating mode

● DQ Yes

● DQ with energy-saving function No

● PWM No

● Cam control (switching at comparison values) No

● Oversampling No

● MSO Yes

● Integrated operating cycle counter Yes; FW V2.3.0 or higher

Output voltage

Rated value (AC) 230 V; 120/230 V AC, 50/60 Hz

Power

Power consumption from the backplane bus 0.9 W

Power loss

Power loss, typ. 10.8 W

Address area

Address space per module

● Inputs 0 byte

● Outputs 1 byte

Digital outputs

Type of digital output Triac

Number of digital outputs 8

Current-sinking No

Current-sourcing Yes

Digital outputs, parameterizable Yes

Short-circuit protection No

● built-in fuse 6.3 A melting fuse, slow-blow

Size of motor starters according to NEMA, max. 5

Digital output functions, parameterizable

● Switching tripped by comparison values No

● Freely usable digital output No

● PWM output No

● Digital output with oversampling No

Switching capacity of the outputs

● with resistive load, max. 2 A

● on lamp load, max. 50 W

Output voltage

● for signal “1”, min. L1 (-1.5 V) at maximum output current; L1 (-8.5 V) at minimum output current

Output current

● for signal “1” rated value 2 A

● for signal “1” permissible range, min. 10 mA

● for signal “1” permissible range, max. 15 A; max. 1 AC cycle

● for signal “0” residual current, max. 2 mA

Output delay with resistive load

● “0” to “1”, max. 1 AC cycle

● “1” to “0”, max. 1 AC cycle

Parallel switching of two outputs

● for logic links No

● for uprating No

● for redundant control of a load Yes

Switching frequency

● with resistive load, max. 10 Hz

● with inductive load, max. 0.5 Hz

● on lamp load, max. 1 Hz

Total current of the outputs

● Current per channel, max. 2 A; see additional description in the manual

● Current per group, max. 2 A; see additional description in the manual

● Current per module, max. 10 A; see additional description in the manual

Cable length

● shielded, max. 1 000 m

● unshielded, max. 600 m

Interrupts/diagnostics/status information

Diagnostics function No

Substitute values connectable Yes

Alarms

● Diagnostic alarm No

● Maintenance interrupt Yes; maintenance alarm for switching cycle counter

Diagnoses

● Monitoring the supply voltage No

● Wire break No

● short-circuit No

● Group error No

Diagnostics indication LED

● RUN LED Yes; green LED

● ERROR LED Yes; red LED

● MAINT LED Yes; Yellow LED

● Monitoring of the supply voltage (PWR-LED) No

● Channel status display Yes; green LED

● for channel diagnostics No

● for module diagnostics Yes; red LED

Potential separation

Potential separation channels

● between the channels Yes

● between the channels, in groups of 1

● between the channels and backplane bus Yes

● Between the channels and load voltage L1 Yes

Permissible potential difference

between different circuits 250 V AC between the channels and the backplane bus; 500 V AC between the channels

Isolation

Isolation tested with 3 100 V DC

Standards, approvals, certificates

Siemens Eco Profile (SEP) Siemens EcoTech

Suitable for safety functions No

Suitable for safety-related tripping of standard modules No

Ecological footprint

● environmental product declaration Yes

Global warming potential

— global warming potential, (total) [CO2 eq] 43.8 kg

— global warming potential, (during production) [CO2 eq] 9.5 kg

— global warming potential, (during operation) [CO2 eq] 34.5 kg

— global warming potential, (after end of life cycle) [CO2 eq]